Gas Detection Services for Industrial Plants
Fixed gas detection / sensor calibration / PLC integration / alarming. Combustible & toxic gas, H₂S, and oxygen deficiency. Remote support or onsite, from a senior controls engineer.
- Protect people & equipment — reliable fixed detection for combustible and toxic gas hazards.
- Stay compliant & audit-ready — documented sensor calibration and bump testing.
- Coordinate your safety response — detection integrated with PLC/SCADA alarming and shutdowns.
Talk directly with: Jesse Lomas
Senior controls engineer • 13+ years with gas detection systems, calibration & PLC/SCADA integration
(945) 941-7304 • Mon–Fri, 7a–5p CST • Gas system in fault or alarm right now? Tell us when you call.
Trusted by facilities across oil & gas, landfill gas, water/wastewater, chemical processing, and manufacturing
Combustible & toxic gas expertise — H₂S, oxygen deficiency, and toxic gas detection
DOD & Honeywell monitors — PS-7/PS-8, CL8, Midas, ACM/TGM installed, calibrated & integrated
Controls engineers, not parts-swappers — detection tied into PLC/SCADA alarming & shutdowns
Schedule Your Gas Detection Consult
Tell us about the gases you're monitoring, your existing system, and your timeline. We'll get you on a call with a senior controls engineer. No cost, no obligation.
Gas Detection Specialists — Not Generalists
We work in fixed gas detection and the control systems behind it. You won't spend the first hour explaining the difference between a catalytic bead and an electrochemical sensor.
Fixed gas detection systems
Design and installation of single-point and multipoint fixed detection for combustible gases, H₂S, oxygen deficiency, and toxic gases — 24/7 coverage.
Sensor calibration & bump testing
Scheduled calibration and bump testing with documented results so detection stays accurate, compliant, and audit-ready.
Controller & PLC integration
Detection controllers tied into your PLC and SCADA for centralized alarming, logging, and automated shutdowns.
Alarm & notification
Audible and visual alarms, horns, strobes, and remote notification with configurable thresholds tailored to your facility.
Maintenance & service plans
Preventive maintenance, sensor replacement, and service plans that keep your system reliable over its full lifecycle.
Upgrades & retrofits
Modernize aging equipment with current sensor technology and controllers to improve reliability, coverage, and integration.
What “done” looks like
Landfill gas
Deployed multipoint fixed detection for combustible gas and H₂S tied into plant SCADA.
Alarms and shutdowns are coordinated through the control system, and calibration records keep the program audit-ready.
Process facility
Retrofitted aging single-point monitors and set up a recurring calibration schedule.
Coverage improved, false alarms dropped, and bump testing now happens on a documented interval.
Simple 3-Step Process
30-minute remote consult
Tell us about the gases you monitor and your existing system. We'll give you a straight read and recommended next step.
Site assessment & scope
Onsite or remote review of detectors, controllers, and coverage. You get a written scope and quote — no surprises.
Install, calibrate & handoff
We install, calibrate, integrate, and leave you with documentation your team can actually maintain.
Gas Detection Services — Frequently Asked Questions
What gas monitors do you install, calibrate, and integrate?
Single-point and multipoint fixed gas detection — DOD PS-7/PS-8 single-point and CL8 multipoint monitors, and Honeywell Midas single-point and ACM/TGM multipoint monitors. We deploy detectors for combustible gases, hydrogen sulfide, oxygen deficiency, and toxic gases.
Can you respond when a gas detection system is in fault or alarm?
Yes. Call us and tell us which monitor or zone is faulting or in alarm. We'll get a technician on a remote session or onsite as fast as we can mobilize to isolate the sensor, controller, or wiring and get you protected again.
Do you handle sensor calibration and bump testing?
Yes — scheduled calibration and bump testing with documented results so your gas detection program stays accurate, compliant, and audit-ready. We can set up recurring service intervals around sensor life.
Can you integrate gas detection with our PLC and SCADA?
Yes. We tie gas detection controllers into your PLC and SCADA for centralized alarming, logging, and automated shutdowns, so detection is part of a coordinated safety response — not an island.
Can you work remotely or do you need to be onsite?
Both. Controller configuration, alarm thresholds, and integration can often be supported remotely. Sensor calibration, bump testing, detector placement, and field wiring happen onsite.
Do you retrofit or upgrade aging gas detection equipment?
Yes. We modernize existing installations with current sensor technology and controllers to improve reliability, coverage, and integration — without a full rebuild where it isn't needed.
What does a typical project look like?
Step 1: 30-minute remote consult to scope the hazard and existing system. Step 2: site assessment and a written scope/quote. Step 3: installation, calibration, or integration with handoff documentation. We don't disappear after commissioning.
Gas System in Fault or Alarm? Call Now.
For urgent gas detection troubleshooting, skip the form and call. Tell us what's faulting and we'll move.
Monday – Friday, 7:00 AM – 5:00 PM CST
Gas detection specialists. Fixed detection • Calibration • PLC integration • Alarming. Remote or onsite. No cost first consult.