Instrumentation Services for Industrial Plants
Calibration / installation / loop testing / control valves. Flow, level, pressure & temperature transmitters. Remote support or onsite, from a senior controls engineer.
- Trust your numbers again — traceable calibration with before/after documentation.
- Get loops commissioned right — verified wiring, scaling, and signal integrity before startup.
- Tie measurement into control — field devices integrated cleanly with your PLC and SCADA.
Talk directly with: Jesse Lomas
Senior controls engineer • 13+ years with process instrumentation, calibration & loop commissioning
(945) 941-7304 • Mon–Fri, 7a–5p CST • Instrument or loop down right now? Tell us when you call.
Trusted by facilities across water/wastewater, oil & gas, landfill gas, chemical processing, and manufacturing
Traceable calibration of flow, level, pressure & temperature instruments with full documentation
Loop checks & commissioning from field device to PLC/SCADA, verified before startup
Controls engineers, not parts-swappers — instrumentation tied into your control strategy
Schedule Your Instrumentation Consult
Tell us about the instruments or loops involved, what's happening in the field, and your timeline. We'll get you on a call with a senior controls engineer. No cost, no obligation.
Instrumentation Specialists — Not Generalists
We work in field instrumentation and the control systems behind it. You won't spend the first hour explaining the difference between a 4–20 mA loop and a HART configuration.
Calibration
Traceable calibration of transmitters, gauges, and analyzers with documented before/after readings for quality and compliance records.
Field device installation
Mounting, wiring, tubing, configuration, and commissioning of new instruments per spec and ready for reliable operation.
Flow, level, pressure & temperature
Selection, configuration, and servicing of flow meters, level transmitters, pressure transmitters, RTDs, and thermocouples for repeatable measurement.
Loop testing & commissioning
End-to-end loop checks from field device to control system — wiring, scaling, and signal integrity verified before startup.
Control valves & positioners
Setup, calibration, and tuning of control valves and positioners to optimize loop response and stable process control.
PLC/SCADA integration
Field devices tied into your control system — scaling, alarm limits, and historian tags — so measurement is accurate end to end.
What “done” looks like
Water / wastewater
Recalibrated drifting level and flow transmitters and re-checked every loop into SCADA.
Operators stopped second-guessing the numbers, and compliance reporting was backed by traceable calibration records.
Process facility
Installed and commissioned new pressure and temperature instrumentation ahead of a plant startup.
Devices mounted, wired, and scaled, every loop checked end to end, and the line came up on schedule.
Simple 3-Step Process
30-minute remote consult
Tell us about your instruments or loops and what's happening. We'll give you a straight read and recommended next step.
Site assessment & scope
Onsite or remote review of devices, wiring, and loops. You get a written scope and quote — no surprises.
Calibration, install & handoff
We calibrate, install, commission, and leave you with documentation your team can actually maintain.
Instrumentation Services — Frequently Asked Questions
What instrumentation do you calibrate and service?
Flow, level, pressure, and temperature transmitters, gauges and analyzers, RTDs and thermocouples, and analytical instruments for pH, conductivity, and turbidity. We verify accuracy against traceable standards and provide documentation for your quality and compliance records.
Can you respond when a measurement or loop is down?
Yes. Call us and tell us which loop or device is misreading or offline. We'll get a technician on a remote session or onsite as fast as we can mobilize to isolate the field device, wiring, or control-system side of the problem.
Do you handle installation and commissioning of new instruments?
Yes — mounting, wiring, tubing, configuration, and full loop checks from the field device to the PLC or SCADA system. We commission every loop so scaling and signal integrity are verified before startup.
Can you work remotely or do you need to be onsite?
Both. Configuration, transmitter ranging, control-system scaling, and troubleshooting can often be supported remotely. Physical calibration, installation, tubing, and field loop checks happen onsite.
Do you provide calibration documentation and certificates?
Yes. Every calibration is documented against traceable standards with before/after readings so your instrumentation program stays audit-ready.
Do you integrate instrumentation with PLC and SCADA systems?
Yes. We tie field devices into your control system — scaling, alarm limits, and historian tags — so your measurements are accurate end to end, not just at the transmitter.
What does a typical project look like?
Step 1: 30-minute remote consult to scope the problem. Step 2: site assessment and a written scope/quote. Step 3: calibration, installation, or loop work with handoff documentation. We don't disappear after startup.
Instrument or Loop Down? Call Now.
For urgent instrumentation troubleshooting, skip the form and call. Tell us what's misreading and we'll move.
Monday – Friday, 7:00 AM – 5:00 PM CST
Instrumentation specialists. Calibration • Installation • Loop testing • Control valves. Remote or onsite. No cost first consult.